Perl 5 to Perl 6 guide - functions

Builtin functions in Perl 5 to Perl 6

DESCRIPTION

A (hopefully) comprehensive list of Perl 5 builtin functions with their Perl 6 equivalents with notes on variations between them where necessary.

NOTE

This document is an attempt to guide you from the functions in Perl 5's perlfunc document to their equivalents in Perl 6. For full documentation on the Perl 6 functions, follow the links in this document to their respective documentation.

One general comment: Perl 6 takes its objects a lot more seriously than Perl 5. In Perl 6, everything is an object, although the language is flexible enough to not force you to work in an object oriented manner if you do not wish to do so. What this does mean, however, is that a lot of things that are function calls of the form function(@args) are now also method calls of the form @args.function (In rare cases, there is only a method call). This should be obvious in the following text, but it probably behooves you to get into that frame of mind now.

Also, unless otherwise stated, the use of the term "function" here will mean a function in the style of func(@args), while "method" will refer to a function in the style of @args.func.

Alphabetical listing of Perl functions

Filetests

Perl 6 gives you a couple of options when it comes to file tests. You can do a smartmatch (~~) or you can call a method.

In Perl 6, you don't need to actually open a filehandle in the traditional way (although you can) to do a filetest. You can simply append .IO to the filename. For instance, here is how to check if a file is readable using smartmatch:

'/path/to/file'.IO ~~ :r

You can, of course, use an already opened filehandle. Here, using the filehandle $fh, is an example, using the method syntax for the file test:

$fh.r

Most of the former filetests have colon equivalents for use with smartmatch:

:e Exists
:d Directory
:f File
:l Symbolic link
:r Readable
:w Writable
:x Executable
:s Size
:z Zero size

All of these tests can be used as methods (without the colon).

Three tests, however, only have method equivalents:

$fh.modified# -M $fh 
$fh.accessed# -A $fh 
$fh.changed;  # -C $fh 

The remaining filetests in Perl 5 do not appear to be implemented in Perl 6.

The documentation for this can be found at File test operators.

There is more information on reading and writing files at io. Also, the section on open() below may be helpful.

The Perl 6 ecosystem has a module P5-X which exports the behavior as much as possible in Perl 6.

abs

Works as a function (abs($x)), but also as a method. One gotcha, however - method calls bind more tightly than -, so, for example, -15.abs evaluates as -(15.abs) giving you -15. In this example, you would have to do something like (-15).abs.

abs also operates on $_ in the absence of a value, but not as a function, and as a method you need to call it as .abs rather than simply abs.

The Perl 6 ecosystem has a module P5math which exports an abs function that mimics the original Perl 5 behavior as much as possible.

accept

accept is a method you can call on a server, e. g. $server.accept(). Instead of returning a packed address, it returns a socket, most likely an IO::Socket object of some sort.

alarm

alarm() is no more. But it is possible to have code execute after a certain time has elapsed, or at a given time:

Promise.in(5).then: { say "five seconds have passed" }
 
Promise.at(now + 5).then: { say "five seconds have passed" }

In Perl 6, this does *not* involve any (dummy) signals.

atan2

Available as a function as well as being able to be used as a method. For instance, these are equivalent:

atan2(100);
100.atan2;

bind

[NEEDS FURTHER RESEARCH] No sign of a socket-related bind() in Perl 6. At a guess, whatever socket binding is needed happens when you create a new socket object.

binmode

Instead of this, you would use :bin as the file mode when opening the socket. E. g. my $fh = open("path/to/file", :bin);

bless

With the changes in class creation in Perl 6, this may find less use than in Perl 5, and is a method as well as a function. The Perl 6 docs say "Creates a new object of the same type as the invocant, uses the named arguments to initialize attributes, and returns the created object." If you're porting a module from Perl 5 to Perl 6, it's quite possible you'll want to use new for creating objects rather than bless, although there may be some situations in which the latter may still be useful.

break

Not in Perl 6. For breaking out of given blocks, you should probably take a look at proceed and succeed here.

caller

There are a couple different ways to get at caller information in Perl 6. The basic functionality is provided through callframe now. However, Perl 6 constructs call frames for regular blocks, not just for subroutines, so there are more frames to look through. The following will retrieve the basic information that caller can return:

my $frame   = callframe(0); # OR just callframe() 
my ($subroutine$package);
if $frame.code ~~ Routine {
    $subroutine = $frame.code.name;
    $package    = $frame.code.package;
}
my $file    = $frame.file;
my $line    = $frame.line;

Many of the other details returned by caller are specific to Perl 5 and have no meaning in Perl 6.

You can also get some of the information for the current frame or routine frame by using the dynamic variables &?ROUTINE, &?BLOCK, $?PACKAGE, $?FILE, and $?LINE. For many purposes, Backtrace may provide an easier way to browse through the call stack.

The Perl 6 ecosystem has a module P5caller which exports a caller function that mimics the original Perl 5 behavior as much as possible.

chdir

Works as it does in Perl 5 but must take an argument. The behavior of chdir() (with regards to looking at HOME and LOGDIR) is not supported.

In Perl 6, chdir only changes the $*CWD dynamic variable. It does not actually change the default directory from the OS's point of view; the special dynamic-variable routine &*chdir can be used for that, if needed.

This is done this way, because there is no concept of a "default directory per OS thread". And since Perl 6 does not fork, but only does threading, it was felt that the "current directory" concept should be in the $*CWD dynamic variable, which can be lexically scoped, and thus can be thread-safe.

The Perl 6 ecosystem has a module P5chdir which exports a chdir function that mimics the original Perl 5 behavior as much as possible, including looking at HOME and LOGDIR.

chmod

Functions as under Perl 5, with the difference that octal numbers are represented differently (0o755 rather than 0755). You may also use it as a method, e. g. $fh.chmod(0o755).

chomp

The behavior of chomp is different than in Perl 5. It leaves the target unaffected and returns a copy of the target with a final logical newline removed, e.g. $x = "howdy\n";$y = chomp($x); results in $x containing "howdy\n" and $y containing "howdy". Also works as a method, e.g. $y = $x.chomp. As with many other methods, also works with assignment to modify the target in place, e.g. $x.=chomp results in $x containing "howdy".

Note that chomp() (without arguments) is not supported in Perl 6.

The Perl 6 ecosystem has a module P5chomp which exports a chomp function that mimics the original Perl 5 behavior as much as possible.

chop

As with chomp, in Perl 6, this returns the chopped string, rather than chopping in place. I. e. $x = "howdy";$y = chop($x); results in $x being "howdy" and $y being "howd". Also works as a method: $y = $x.chop.

Note that chop() (without arguments) is not supported in Perl 6.

The Perl 6 ecosystem has a module P5chomp which exports a chop function that mimics the original Perl 5 behavior as much as possible.

.head2 chown

chown is not in Perl 6.

chr

Similar to the Perl 5 version, coerces the target to an integer, and uses that as a Unicode code point to return the relevant character. Can be used as a function and a method:

chr(65); # "A" 
65.chr;  # "A"

Note that chr() (without arguments) is not supported in Perl 6.

The Perl 6 ecosystem has a module P5chr which exports a chr function that mimics the original Perl 5 behavior as much as possible.

chroot

chroot is not in Perl 6.

close

As in Perl 5, closes a filehandle. Returns a boolean value. Both close $fh and $fh.close will work.

Note that close() (without arguments) is not supported in Perl 6.

closedir

Not supported in Perl 6.

The Perl 6 ecosystem has a module P5opendir which exports a closedir function that mimics the original Perl 5 behavior as much as possible.

connect

Use connect from IO::Socket::Async for an asynchronous socket or create a IO::Socket::INET socket for a synchronous one.

continue

Instead of a continue block, you should use a NEXT block. The closest analog to a bare continue; in Perl 5 appears to be proceed/succeed.

cos

Works as in Perl 5.

cos also operates on $_ in the absence of a value, but not as a function, and as a method you need to call it as .cos rather than simply cos.

The Perl 6 ecosystem has a module P5math which exports a cos function that mimics the original Perl 5 behavior as much as possible.

crypt

Not available in Perl 6.

The Perl 6 ecosystem has a module P5math which exports a crypt function that mimics the original Perl 5 behavior as much as possible.

dbm functions

These functions have largely been superseded in Perl 5, and are unlikely to ever turn up in Perl 6 (although any assumptions about the Perl 6 database implementation may be premature).

defined

Probably does what you expect, but technically it returns False on the type object, and True otherwise. This may make more sense when you realize that $num.perl is the type Any if you haven't assigned anything to it, and the assigned value if you have. Can, of course be used as a method: $num.defined. And any newly created class can have its own .defined method, thereby deciding how and when it should be considered undefined.

Note that defined() (without arguments) is not supported in Perl 6.

The Perl 6 ecosystem has a module P5defined which exports a defined function that mimics the original Perl 5 behavior as much as possible.

delete

Perl 6 replaces this with the new adverb syntax, specifically the :delete adverb. E. g. my $deleted_value = %hash{$key}:delete; and my $deleted_value = @array[$i]:delete;.

die

Works similarly to the Perl 5 version, but Perl 6's Exception mechanism may give you more power and flexibility than is available in Perl 5. See exceptions. To omit the stacktrace and location, like Perl 5's die "...\n", use:

note "...";
exit 1;

do

Similar to the Perl 5 version. Note that there must be a space between the do and the block.

Has been replaced in Perl 6 by EVALFILE.

dump

According to S29, dump has been... dumped.

each

There is no exact equivalent, but you can use %hash.kv which returns a list of keys and values. For example: for %hash.kv -> $k, $v { say "$k: $v" }

Incidentally, what we have there with the -> is called a pointy block and, though there are a number of examples in the documentation, there doesn't seem to be a really clear explanation of how they work. https://design.perl6.org/S04.html#The_for_statement may be of some help here, as well as the design document at https://design.perl6.org/S06.html#%22Pointy_blocks%22. There is also some information at https://en.wikibooks.org/wiki/Perl_6_Programming/Blocks_and_Closures#Pointy_Blocks

The Perl 6 ecosystem has a module P5each which exports an each function that mimics the original Perl 5 behavior as much as possible.

eof

In Perl 6, this is not usable as a function, but only as a method. I. e. $filehandle.eof. Returns True if at end of file.

eval

The closest replacement is the EVAL function. However, this function has to be allowed explicitly using a pragma to work in the same way. Note that EVAL does not do any exception handling!

evalbytes

No equivalent.

exec

Nothing in Perl 6 exactly replicates the Perl 5 exec. shell and run are similar to Perl 5's system, but exec's behavior of not returning after executing a system command would have to be emulated by something like shell($command);exit(); or possibly exit shell($command);.

Neither of these workarounds have the behavior (on Unix-like systems) of replacing your Perl program's process with the new program; notably, they will not work for the practice in some long-running daemons of periodically redoing exec on themselves to reset their state or force operating-system cleanup. Nor will they serve exec's function of returning stale resources to the operating system.

If you want exec for these behaviors, you can use an exec* function via the NativeCall interface. Consult your operating system manual pages for exec (or other similarly-named calls such as execl, execv, execvp, or execvpe). (Beware: these calls are not generally portable between Unix-like operating system families.) Given those caveats, the Perl 6 ecosystem Native::Exec module exports an exec function for Unix-like systems.

exists

In Perl 6, this is not a function, but an adverb:

%hash{$key}:exists;
@array[$i]:exists;

exit

Appears to do the same thing as in Perl 5.

exp

Same as in Perl 5.

exp also operates on $_ in the absence of a value, but not as a function, and as a method you need to call it as .exp rather than simply exp.

The Perl 6 ecosystem has a module P5math which exports an exp function that mimics the original Perl 5 behavior as much as possible.

fc

Looks like it does the same thing as in Perl 5 except that calling it without arguments is not supported in Perl 6.

The Perl 6 ecosystem has a module P5fc which exports a fc function that mimics the original Perl 5 behavior as much as possible.

fcntl

Appears not to be in Perl 6.

__FILE__

Replaced by $?FILE which is slightly different from __FILE__ in that it is always an absolute path, rather than a relative one in the Perl 5 case.

The Perl 6 ecosystem has a module P5__FILE__ which exports a __FILE__ term that mimics the original Perl 5 behavior as much as possible.

fileno

The native-descriptor method on IO::Handle returns the equivalent of fileno.

The Perl 6 ecosystem has a module P5fileno which exports a fileno function that mimics the original Perl 5 behavior as much as possible.

flock

Currently unimplemented.

fork

There is no built-in fork function. While it's possible to call it using NativeCall, it's highly unlikely that the resulting process will be usable.

Perl 6 provides extensive support for, and internally uses, threads. However, fork only clones the thread that called fork, resulting in a process that will be missing its other threads, which will have been in unknown states and probably holding locks. Even if a Perl 6 program doesn't knowingly start any threads, the compiler may create some of its own in the process of precompilation, and the VMs that Perl 6 runs on also create their own internal worker threads for doing things like optimization and GC in the background. Thus, the presence of threads is pretty much assured, and there's no reasonable way to make fork reliably work in this case.

formats

Perl 6 does not have built-in formats.

getc

Reads a single character from the input stream as in Perl 5. May now also be used as a method: $filehandle.getc

getpeername

S29 lists it, but the implementation does not seem clear or, for that matter, implemented.

getpgrp

Will not be implemented.

The Perl 6 ecosystem has a module P5getpriority which exports a getpgrp function that mimics the original Perl 5 behavior as much as possible.

getppid

Will not be implemented.

The Perl 6 ecosystem has a module P5getpriority which exports a getppid function that mimics the original Perl 5 behavior as much as possible.

getpriority

Will not be implemented.

The Perl 6 ecosystem has a module P5getpriority which exports a getpriority function that mimics the original Perl 5 behavior as much as possible.

get and set functions

The Perl 6 ecosystem has a module P5getpwnam which exports the endpwent, getlogin, getpwent, getpwnam, getpwuid and setpwent functions that mimic the original Perl 5 behavior as much as possible.

The Perl 6 ecosystem has a module P5getgrnam which exports the endgrent, getgrent, getgrgid, getgrnam and setgrent functions that mimic the original Perl 5 behavior as much as possible.

The Perl 6 ecosystem has a module P5getnetbyname which exports the endnetent, getnetent, getnetbyaddr, getnetbyname and setnetent functions that mimic the original Perl 5 behavior as much as possible.

The Perl 6 ecosystem has a module P5getservbyname which exports the endservent, getservent, getservbyname, getservbyport and setservent functions that mimic the original Perl 5 behavior as much as possible.

The Perl 6 ecosystem has a module P5getprotobyname which exports the endprotoent, getprotoent, getprotobyname, getprotobynumber and setprotoent functions that mimic the original Perl 5 behavior as much as possible.

[NEEDS FURTHER RESEARCH] Apparently this range of functions are to be handled by roles like User, Group, etc.

getsock*

[NEEDS FURTHER RESEARCH] These are likely implemented by some kind of IO::Socket object, but details are unclear.

glob

Not available in core, although some of the functionality is offered by dir routine and its test argument.

See IO::Glob module in ecosystem

gmtime

Like the various parts of localtime, gmtime's functionality appears to in the DateTime object. To get a UTC version of a DateTime object for the current time, for instance, use my $gmtime = DateTime.now.utc.

The Perl 6 ecosystem has a module P5localtime which exports a gmtime function that mimics the original Perl 5 behavior as much as possible.

goto

The syntax for goto LABEL is already accepted, but the runtime part of goto is not yet implemented. So this will result in a runtime error:

FOO: goto FOO# Label.goto() not yet implemented. Sorry.

grep

Still in Perl 6, with the caveat that the block form now requires a comma after the block. I.e. @foo = grep { $_ = "bars" }, @baz. Can also be used as a method: @foo = @bar.grep(/^f/)

hex

In Perl 6 an expression must be specified.

Replaced by the adverbial form :16. E. g. :16("aF") returns 175. This is Str->Int.

The opposite result can be achieved (Int->Str) by using the .base method: 0xaF.base(10)

It just so happens that .Str defaults to base 10, so if you just say 0xaF, that will also print 175, but that may not be immediately obvious, so may not be the best way to go for this.

The Perl 6 ecosystem has a module P5hex which exports a hex function that mimics the original Perl 5 behavior as much as possible.

import

Was never a builtin function in Perl 5 in the first place. In Perl 6, typically, one declares functions as exportable or not, and all the exportable ones are exported. Nevertheless, selective importing is possible, but beyond the scope of this document. For details, see this section.

index

Works as in Perl 5. Can also now be used as a method: "howdy!".index("how"); # 0. Main difference with Perl 5 is that Nil is returned instead of -1 when the substring is not found. This is very useful in combination with the with command:

with index("foo","o"-> $index {
    say "Found it at $index";
}
else {
    say "Not found"
}

The Perl 6 ecosystem has a module P5index which exports an index function that mimics the original Perl 5 behavior as much as possible.

int

There is a truncate function in Perl 6 (also usable as a method) that does what Perl 5's int does. You may want to use that as a direct translation of Perl 5 code, but in Perl 6, you can just as easily call the .Int method on the number. 3.9.Int; # 3 and 3.9.truncate are equivalent.

Please note that int does have a meaning in Perl 6. It is type that can be used to indicate a native integer:

my int $a = 42;   # a native integer, similar to Perl 5's integer values

int also operates on $_ in the absence of a value, but not as a function, and as a method you need to call it as .int rather than simply int.

The Perl 6 ecosystem has a module P5math which exports an int function that mimics the original Perl 5 behavior as much as possible.

ioctl

Currently unimplemented in Perl 6.

join

Works as in Perl 5, and also works as a method: @x.join(",")

keys

Works as in Perl 5, and can also be used as a method: %hash.keys

kill

No pre-defined core alternative exists. A non-portable method can be to use NativeCall:

use NativeCall;
sub kill(int32int32is native {*};
kill $*PID9# OUTPUT: «Killed␤»

To kill processes that were started by creating a Proc::Async, use Proc::Async.kill method.

last

Same as in Perl 5.

lc

Works as in Perl 5, and also as a method: "UGH".lc. In Perl 6 an expression must be specified.

The Perl 6 ecosystem has a module P5lc which exports an lc function that mimics the original Perl 5 behavior as much as possible.

lcfirst

Does not exist in Perl 6.

The Perl 6 ecosystem has a module P5lcfirst which exports an lcfirst function that mimics the original Perl 5 behavior as much as possible.

length

Replaced by chars, typically used as a method ($string.chars), but also works as a function.

The Perl 6 ecosystem has a module P5length which exports an length function that mimics the original Perl 5 behavior as much as possible.

__LINE__

Replaced by $?LINE.

The Perl 6 ecosystem has a module P5__FILE__ which exports a __LINE__ term that mimics the original Perl 5 behavior as much as possible.

See link

listen

Not clearly documented, but it appears that listen will be a method you would call on some variety of IO::Socket object.

local

The Perl 6 equivalent is temp. Unlike local, however, the value of the given variable is not immediately unset: it retains its original value until assigned to.

localtime

Most of the functionality of localtime is found in DateTime. The specific parts of localtime can be found as follows:

my $d = DateTime.now;
my $sec  = $d.second# Potentially includes fractional seconds 
my $min  = $d.minute;
my $hour = $d.hour;
my $mday = $d.day-of-month# or $d.day; 1..31 
my $mon  = $d.month# 1..12 
my $year = $d.year;
my $wday = $d.day-of-week# 1 => Monday, 2 => Tuesday, etc. 
my $yday = $d.day-of-year# 1..366 

Please note that ranges are not 0-based in Perl 6, as shown in the comments in the example.

There does not currently appear to be a way to get Perl 5's $isdst. Also, the result of scalar(localtime) that Perl 5 provides is not available. $d.Str will give something along the lines of "2015-06-29T12:49:31-04:00".

The Perl 6 ecosystem has a module P5localtime which exports a localtime function that mimics the original Perl 5 behavior as much as possible.

lock

There currently is no equivalent for this In Perl 6. There is a Lock class for creating a Lock object, that can be locked/unlocked as needed. But such a lock does not refer to any external objects.

log

Same as in Perl 5.

log also operates on $_ in the absence of a value, but not as a function, and as a method you need to call it as .log rather than simply log.

The Perl 6 ecosystem has a module P5math which exports a log function that mimics the original Perl 5 behavior as much as possible.

lstat

Likely implemented somewhere in one of the IO classes in Perl 6, but it is not clear where at this time.

m//

Regular expression syntax is somewhat different in Perl 6, but the match operator still exists. If you're trying to rewrite some Perl 5 code, the most important difference is that =~ is replaced by the smartmatch operator, ~~. Similarly, !~ is replaced by !~~. Options for regex operators are adverbs and are complicated. For details, see Adverbs

map

As a function, the only difference between Perl 5 and Perl 6 is that, if you're using a block, the block must be followed by a comma. Can also be used as a method: @new = @old.map: { $_ * 2 }

mkdir

Works as in Perl 5. When giving a multi-level directory specification, it will automatically create non-existing intermediate directories with the same MASK (similar to what "make_path" does of the File::Path module in Perl 5).

The zero argument (implicit $_) version is not permitted in Perl 6.

msg*

Not builtins in Perl 6. May appear in an external module at some point. Maybe.

my

Works as in Perl 5.

next

The same in Perl 6.

no

In Perl 6, this is usable for pragmas such as strict, but not for modules or versions.

oct

Replaced by the adverbial form :8. E. g. :8("100") returns 64.

If you want to deal with strings that start in 0x, 0o, or 0b, you can just use the prefix:<+> operator.

The Perl 6 ecosystem has a module P5hex which exports an oct function that mimics the original Perl 5 behavior as much as possible.

open

The most obvious change from Perl 5 is the file mode syntax. To open a file for reading only, you would say open("file", :r). For write- only, read-write, and append, you would use :w, :rw, and :a respectively. There are also options for encoding and how the filehandle deals with newlines. Details here.

Another important change is that filehandles don't get automatically closed on scope exit. It's necessary to call close explicitly.

opendir

No replacement. See &dir/IO::Path.dir for alternatives.

The Perl 6 ecosystem has a module P5opendir which exports an opendir function that mimics the original Perl 5 behavior as much as possible.

ord

Same as in Perl 5. May be used as a method: "howdy!".ord; # 104

Note that ord() (without arguments) is not supported in Perl 6.

The Perl 6 ecosystem has a module P5chr which exports a ord function that mimics the original Perl 5 behavior as much as possible.

our

The same in Perl 6.

pack

Available in Perl 6 when use experimental :pack has been specified in the scope where pack needs to be called. The template options are currently more restricted than they are in Perl 5. The current documented list can be found at unpack.

The Perl 6 ecosystem has a module P5pack which exports a pack function that mimics the original Perl 5 behavior as much as possible and which has a bigger set of supported features than the experimental Perl 6 version.

package

S10 indicates that package can be used in Perl 6, but only with a block. I. e. package Foo { ... } means that the code within the block would be in package Foo. There is a special case where a declaration of the form package Foo; as the first statement in a file indicates that the rest of the file is Perl 5 code, but the usefulness of this is unclear. In fact, as modules and classes are declared with distinct keywords (such as class), it's unlikely you will use package directly in Perl 6.

__PACKAGE__

Replaced by $?PACKAGE which is slightly different from __PACKAGE__ in that it is the actual package object. You should call the .^name method on it to get a string.

The Perl 6 ecosystem has a module P5__FILE__ which exports a __PACKAGE__ term that mimics the original Perl 5 behavior as much as possible.

pipe

Depending on your needs, see Channel to shuttle data between threads (and Concurrency tutorial for other options), or see Proc type for piping to and from processes.

pop

Works in Perl 6, and can also be used as a method. I. e. my $x = pop @a; and my $x = @a.pop; are equivalent.

The non-parameter version of pop does not exist. Also, if the array is empty, a Failure will be returned in Perl 6, which will throw if the value is actually used in a significant way.

If you are using only defined values in your array, you can use the with function to handle this case:

with pop @array -> $popped {
    say "popped '$popped' of the array";
}
else {
    say "there was nothing to pop";
}

The Perl 6 ecosystem has a module P5push which exports a pop function that mimics the original Perl 5 behavior as much as possible.

pos

Not available in Perl 6. The closest equivalent is the :c adverb, which defaults to $/.to if $/ is true, and 0 if it isn't. For information on :c, see Continue.

print

print can be used as a function in Perl 6, writing to standard out. To use print as a function with a filehandle instead of standard out, you can use a method call: $fh.print("howdy!")

The Perl 6 ecosystem has a module P5print which exports a print function that mimics the original Perl 5 behavior as much as possible.

printf

Perl 6 version is similar; see sprintf for details on acceptable format directives. To print to a filehandle other than STDOUT, use the .printf method on that filehandle.

The Perl 6 ecosystem has a module P5print which exports a printf function that mimics the original Perl 5 behavior as much as possible.

prototype

Not available in Perl 6. The closest equivalent is .signature. E. g. say &sprintf.signature results in "(Cool $format, *@args)".

push

Works as in Perl 5, as well as being available as a method: @a.push("foo");. Note: the flattening behavior is different in Perl 6: @b.push: @a will push @a into @b as a single element. See also the append method.

Also note that push in Perl 6 returns the array to which was pushed, contrary to Perl 5 where it returns the new number of elements.

The Perl 6 ecosystem has a module P5push which exports a push function that mimics the original Perl 5 behavior as much as possible.

quoting

These survive the transition to Perl 6. Some notes:

q/.../;  # is still equivalent to using single quotes. 
qq/.../# is still equivalent to using double quotes. 
qw/.../# is more commonly rendered as C<< <...> >> in Perl 6. 

There are some added quoting constructs and equivalents, as explained at quoting.

Has been replaced by rx/.../.

No direct equivalent, i.e. nothing that just returns the string with all the ASCII non-word characters backslashed. In regexes, however, using $foo will treat $foo as a literal string, and using <$foo> will interpret the contents of $foo as regex code. Note that the angle brackets are doing something different here than they do outside a regex. For more information on this, see https://design.perl6.org/S05.html#Extensible_metasyntax_(%3C...%3E)

The Perl 6 ecosystem has a module P5quotemeta which exports a quotemeta function that mimics the original Perl 5 behavior as much as possible.

rand

rand by itself works as it does in Perl 5, but you can no longer give it an argument. You can, however, use it as a method on a number to get that behavior. I. e. the Perl 5 rand(100) is equivalent to 100.rand in Perl 6. Additionally, you can get a random integer by using something like (^100).pick. For why you are able to do that, see ^ operator and pick.

The Perl 6 ecosystem has a module P5math which exports a rand function that mimics the original Perl 5 behavior as much as possible.

read

read is found in IO::Handle and IO::Socket in Perl 6. It reads the specified number of bytes (rather than characters) from the relevant handle or socket. The use of an offset available in Perl 5 is not documented to exist at this time.

readdir

Not a builtin function. To iterate through the contents of a directory, take a look at dir routine.

The Perl 6 ecosystem has a module P5opendir which exports a readdir function that mimics the original Perl 5 behavior as much as possible.

readline

Not available in Perl 6. You most likely want to use the .lines method in some way. For more detailed information on reading from files, see io.

Appears to be gone from Perl 6. There is a method resolve in IO::Path that will follow symlinks if the OS / Filesystem supports them.

The Perl 6 ecosystem has a module P5readlink which exports a readlink function that mimics the original Perl 5 behavior as much as possible.

readpipe

Doesn't appear to be working in Perl 6, but qx// is functional, so it might be lurking around in some class that isn't obvious.

recv

Appears to be in IO::Socket. Not extensively documented at this time.

redo

Unchanged in Perl 6.

ref

Gone. To quote S29, "If you really want the type name, you can use $var.WHAT.^name.

The Perl 6 ecosystem has a module P5ref which exports a ref function that mimics the original Perl 5 behavior as much as possible.

rename

Still available in Perl 6.

requires

No equivalent.

reset

No equivalent.

The Perl 6 ecosystem has a module P5reset which exports a reset function that mimics the original Perl 5 behavior as much as possible.

return

Appears to be available in Perl 6, although not clearly documented.

reverse

In Perl 6, this only reverses the elements of a list. reverse(@a) or @a.reverse. To reverse the characters in a string, use the .flip method.

reverse without parameters is not supported in Perl 6.

The Perl 6 ecosystem has a module P5reverse which exports a reverse function that mimics the original Perl 5 behavior as much as possible.

rewinddir

Not supported in Perl 6.

The Perl 6 ecosystem has a module P5rewinddir which exports a rewinddir function that mimics the original Perl 5 behavior as much as possible.

rindex

Works as in Perl 5, and may also be used as a method. E. g. $x = "babaganush";say $x.rindex("a"); say $x.rindex("a", 3); # 5, 3. Main difference with Perl 5 is that Nil is returned instead of -1 when the substring is not found. This is very useful in combination with the with command:

with index("foo","o"-> $index {
    say "Found it at $index";
}
else {
    say "Not found"
}

The Perl 6 ecosystem has a module P5index which exports a rindex function that mimics the original Perl 5 behavior as much as possible.

rmdir

Works in Perl 6 and can also be used as a method. rmdir "Foo"; and "Foo".IO.rmdir; are equivalent.

s///

Regular expression syntax is somewhat different in Perl 6, but the substitution operator exists. If you're trying to rewrite some Perl 5 code, the most important difference is that =~ is replaced by the smartmatch operator, ~~. Similarly, !~ is !~~. Options for regex operators are adverbs and are complicated. For details, see Adverbs page

say

say can be used as a function, defaulting to standard out. To use say as a function with a filehandle instead of standard out, you need to put a colon after the filehandle. I. e. say $fh: "Howdy!". The use of the colon as an "invocant marker" here is discussed at https://design.perl6.org/S03.html#line_4019. Alternately, you can use a method call: $fh.say("howdy!")

The Perl 6 ecosystem has a module P5print which exports a say function that mimics the original Perl 5 behavior as much as possible.

scalar

Gone. Apparently "very" gone.

Some functions of the modules created for the CPAN Butterfly Plan accept a :scalar named parameter to indicate that the scalar behavior of the function is required.

seek

Not documented in any real way yet, but listed as a method of the IO::Handle class.

The Perl 6 ecosystem has a module P5seek which exports a seek function that mimics the original Perl 5 behavior as much as possible.

seekdir

Not supported in Perl 6.

The Perl 6 ecosystem has a module P5opendir which exports a seekdir function that mimics the original Perl 5 behavior as much as possible.

select

"[S]elect as a global concept is dead." When I asked around about select, I was told that $*OUT and such are overridable in dynamic scope, and that IO::Capture::Simple (at https://github.com/sergot/IO-Capture-Simple) may be of use for something you might be doing with the value of select.

semctl

No longer in core.

semget

No longer in core.

semop

No longer in core.

send

Can be found in the IO::Socket class.

setpgrp

Will not be implemented.

The Perl 6 ecosystem has a module P5getpriority which exports a setpgrp function that mimics the original Perl 5 behavior as much as possible.

setpriority

Will not be implemented.

The Perl 6 ecosystem has a module P5getpriority which exports a setpriority function that mimics the original Perl 5 behavior as much as possible.

setsockopt

Not documented, but probably hiding in an IO class somewhere.

shift

Works in Perl 6, and can also be used as a method. I. e. my $x = shift @a; and my $x = @a.shift; are equivalent.

The non-parameter version of shift does not exist. Also, if the array is empty, a Failure will be returned in Perl 6, which will throw if the value is actually used in a significant way.

If you are using only defined values in your array, you can use the with function to handle this case:

with shift @array -> $shifted {
    say "shifted '$shifted' of the array";
}
else {
    say "there was nothing to shift";
}

The Perl 6 ecosystem has a module P5shift which exports a shift function that mimics the original Perl 5 behavior as much as possible.

shm*

Gone from the core. May turn up in a module somewhere.

shutdown

Not documented, but likely moved into IO::Socket.

sin

Same as in Perl 5.

sin also operates on $_ in the absence of a value, but not as a function, and as a method you need to call it as .sin rather than simply sin.

The Perl 6 ecosystem has a module P5math which exports a sin function that mimics the original Perl 5 behavior as much as possible.

sleep

Still works as in Perl 5, but is not limited to integer values for seconds. And it always returns Nil.

If you're interested in the return values of sleep to ensure sleeping until a specified time, then you should use sleep-until in Perl 6 (which takes an Instant).

If you're interested in running some code every N seconds, and you don't care on which thread it runs, you should probably use react and whenever with a Supply.interval.

The Perl 6 ecosystem has a module P5sleep which exports a sleep function that mimics the original Perl 5 behavior as much as possible.

sockets

Not currently documented, but will likely wind up in IO::Socket.

sort

sort exists in Perl 6, but is somewhat different. $a and $b are no longer special (see Special Variables) and sort routines no longer return positive integers, negative integers, or 0, but rather Order::Less, Order::Same, or Order::More objects. See sort for details. May also be used as a method I. e. sort(@a) is equivalent to @a.sort.

splice

Available in Perl 6. Can also be used as a method. splice(@foo, 2, 3, <M N O P>); is equivalent to @foo.splice(2, 3, <M N O P>); .

split

Works mostly as in Perl 5. There are some exceptions, though. To get the special behavior of using the empty string, you must actually use the empty string - the special case of the empty pattern // being treated as the empty string does not apply. If you use a regex for the split, it will use the regex, while a literal string will be treated literally. If you wish to have the delimiters included in the resulting list, you need to use the named parameter :all, like this: split(';', "a;b;c", :all) # a ; b ; c Empty chunks are not removed from the result list as they are in Perl 5. For that behavior, see comb. Details on split are here. Unsurprisingly, split also now works as a method: "a;b;c".split(';')

The zero argument version must now be called with an explicit empty string, as described above.

sprintf

Works as in Perl 5. The formats currently available are:

% a literal percent sign
c a character with the given codepoint
s a string
d a signed integer, in decimal
u an unsigned integer, in decimal
o an unsigned integer, in octal
x an unsigned integer, in hexadecimal
e a floating-point number, in scientific notation
f a floating-point number, in fixed decimal notation
g a floating-point number, in %e or %f notation
X like x, but using uppercase letters
E like e, but using an uppercase "E"
G like g, but with an uppercase "E" (if applicable)

Compatibility:

i a synonym for %d
D a synonym for %ld
U a synonym for %lu
O a synonym for %lo
F a synonym for %f

Perl 5 (non-)compatibility:

n produces a runtime exception
p produces a runtime exception

There are modifiers for integers, but they're mainly no-ops, as the semantics aren't settled:

h interpret integer as native "short" (typically int16)
l interpret integer as native "long" (typically int32 or int64)
ll interpret integer as native "long long" (typically int64)
L interpret integer as native "long long" (typically uint64)
q interpret integer as native "quads" (typically int64 or larger)

sqrt

Same as in Perl 5.

sqrt also operates on $_ in the absence of a value, but not as a function, and as a method you need to call it as .sqrt rather than simply sqrt.

The Perl 6 ecosystem has a module P5math which exports a sqrt function that mimics the original Perl 5 behavior as much as possible.

srand

Available in Perl 6.

stat

Unlikely to be implemented as a built in function since it's POSIX specific, but available through the NativeCall interface.

state

Available in Perl 6, see state.

study

study is no more.

The Perl 6 ecosystem has a module P5study which exports a study function that mimics the original Perl 5 behavior as much as possible.

sub

Unsurprisingly, we still have subroutines! You can have a signature in your subroutine which allows you to specify arguments. Nevertheless, in the absence of a signature (and only in the absence of a signature), @_ still contains what is passed to the function. So, in theory, you don't need to change that aspect of a function if porting from Perl 5 to Perl 6 (although you should probably consider the option of using a signature). For all the gory details, see functions.

__SUB__

Replaced by &?ROUTINE which is slightly different from __SUB__ in that it is the actual Sub (or Method) object. You should call the .name method on it to get a string.

The Perl 6 ecosystem has a module P5__FILE__ which exports a __SUB__ term that mimics the original Perl 5 behavior as much as possible.

substr

Can be used as a function or a method. substr("hola!", 1, 3) and "hola!".substr(1, 3) both return "ola".

See symlink.

syscall

Not a builtin in Perl 6. Most likely out in a module somewhere, but it's currently unclear where.

sys*

As with the non-sys versions of these functions, are probably lurking in the IO classes somewhere.

system

For this, you probably want (run) or (shell routine).

syswrite

As with sysopen and friends, this has moved into the IO classes.

tell

As a method on IO::Handle.

telldir

Not supported in Perl 6.

The Perl 6 ecosystem has a module P5opendir which exports a telldir function that mimics the original Perl 5 behavior as much as possible.

tie

The Perl 6 alternative to tying a scalar, is the Proxy container. For example:

sub lval() {
  Proxy.new(
    FETCH => method () { ...},
    STORE => method ($new{ ... }
  )
}

This makes lval a left-value sub. Whenever the value is requested, the FETCH method is called. And whenever it is used in an assignment, the STORE method is called.

For arrays and hashes (objects that do the Positional and/or Associative role), one only needs to provide the methods that these roles require to get the functionality that tie provides in Perl 5. These are documented in the Subscripts section.

The Perl 6 ecosystem has a module P5tie which exports tie / tied functions that mimics the original Perl 5 behavior as much as possible.

time

Number of seconds since epoch (as an Int), same as in Perl 5.

times

Not available in Perl 6.

The Perl 6 ecosystem has a module P5times which exports a times function that mimics the original Perl 5 behavior as much as possible.

tr///

Works similarly to how it does in Perl 5. The one caveat is that ranges are specified differently. Instead of using a range "a-z", you would use "a..z", i.e. with Perl's range operator. In Perl 6, tr/// has a method version, called trans, which offers a few additional features.

Perl 5's /r flag is instead implemented as TR/// operator. The y/// equivalent does not exist.

truncate

Not currently implemented (2018.04).

uc

Works as a function and a method. uc("ha") and "ha".uc both return "HA". There is no support for the parameterless version.

The Perl 6 ecosystem has a module P5lc which exports a uc function that mimics the original Perl 5 behavior as much as possible.

ucfirst

Perl 6 has done away with ucfirst. The title case function tc probably does what you need.

The Perl 6 ecosystem has a module P5lcfirst which exports a ucfirst function that mimics the original Perl 5 behavior as much as possible.

undef

There is no undef in Perl 6. You can't undefine a function, and the closest equivalent value is probably Nil, but you'll likely have no use for that.

If you were using something like (undef, $file, $line) = caller;, you would just get the filename and line number directly in Perl 6 instead of discarding the first result of caller. caller has been replaced by callframe in Perl 6, so the equivalent statement would be ($file, $line) = callframe.annotations<file line>;

The Perl 6 ecosystem has a module P5defined which exports an undef function that mimics the original Perl 5 behavior as much as possible.

Still available. Usable as a method: "filename".IO.unlink

The zero argument (implicit $_) version of unlink is not available in Perl 6.

unpack

Available in Perl 6 when use experimental :pack has been specified in the scope where unpack needs to be called. The template options are currently more restricted than they are in Perl 5. The current documented list can be found at unpack.

The Perl 6 ecosystem has a module P5pack which exports an unpack function that mimics the original Perl 5 behavior as much as possible and which has a bigger set of supported features than the experimental Perl 6 version.

unshift

Works as in Perl 5, as well as being available as a method: @a.unshift("foo");. Note: the flattening behavior is different in Perl 6: @b.unshift: @a will unshift @a into @b as a single element. See also the prepend method.

Also note that unshift in Perl 6 returns the array to which was pushed, contrary to Perl 5 where it returns the new number of elements.

The Perl 6 ecosystem has a module P5shift which exports an unshift function that mimics the original Perl 5 behavior as much as possible.

untie

Not supported in Perl 6, but see tie for the whole story.

The Perl 6 ecosystem has a module P5tie which exports an untie function that mimics the original Perl 5 behavior as much as possible.

use

In Perl 5, this requires a minimum version of the perl executable in order to run. In Perl 6, this requires a version of the specification, (e.g. 6.c), which can be implemented by various perl6 executables.

utime

No equivalent.

values

Available in Perl 6. Can also be used as a method. values %hash is equivalent to %hash.values.

vec

There is no support for vec() in Perl 6.

S29 says "Should replace vec with declared buffer/array of bit, uint2, uint4, etc." Support for bit, uint2, uint4 has not landed yet. But support for uint8, int8, uint16, int16, uint32, int32, uint64, int64 as well as the system sized uint and int have landed. In scalar forms, as well as in array and shaped array (aka matrix) forms.

wait

[NEEDS FURTHER RESEARCH] Unclear where this has gone. There's a wait method in Supply, and an await method in both Channel and Promise. Which, if any or all, of these is a direct equivalent of Perl 5's wait is unclear.

waitpid

As with wait, the disposition of this is unclear.

wantarray

There is no wantarray in Perl 6; however, there are very easy ways to cover many of the use cases which wantarray filled.

First, since Perl 6 does not need special reference syntax to contain a List or Array in a Scalar, simply returning a list may be all that is needed:

sub listofstuff {
    return 123;
}
my $a = listofstuff();
print $a;                      # prints "123" 
print join("<"listofstuff()) # prints "1<2<3"

One of the most common use cases is to provide either an array of lines or elements, or a prettier string than would be produced by simply printing the array. One can mix in a custom .Str method for this purpose:

sub prettylist(*@origlist{
    @origlist but role {
        method Str { self.join("<"}
    }
}
print prettylist(123);  # prints "1<2<3" 
print join(">"prettylist(321)); # prints "3>2>1"

In the above example, the returned list may be lazy, and the .Str method is not called until stringification happens, so no extra work is done to generate something which is not asked for.

Another use case is to create methods which are mutators when called in void context but produce copies during assignment. It is generally considered better form in Perl 6 not to do so, even more so because void context does not exist in Perl 6, with the closest equivalent being sink context, since users can quite easily turn any copy-producing method into a mutator using the .= operator:

my $a = "foo\n";
$a.ords.say# says "(102 111 111 10)" 
$a .= chomp;
$a.ords.say# says "(102 111 111)"

However if you have your heart set on using the same function name for both operations, you can get most of the way there by mixing in a .sink method, which will be called when the result finds itself in sink context. There are some caveats however, so again, this is not advised:

multi sub increment($b is rw{
    ($b + 1does role { method sink { $b++ } }
}
multi sub increment($b{
    $b + 1
}
my $a = 1;
increment($a);
say $a;                 # says "2" 
my $b = increment($a);
say $a$b;             # says "2 3" 
# ...users will just have to be aware that they should not accidentally 
# sink a stored value later, though this requires some effort to 
# actually do: 
sub identity($c is rw{ $c };
$a = 1;
$b = increment($a);
identity($b);
$a.say;                  # says "2"

warn

warn throws a resumable exception. To simply print a message to $*ERR, you would use the note function. For more on exceptions, see Exceptions.

write

Formats are gone from Perl 6, so this no longer works.

y///

This synonym for tr/// is gone. For functionality, see the entry for tr///.